If the adapter has been unplugged, you can just plug it back in and it should pair with your phone again without any trouble.  


The motion sensors will automatically re-calibrate in the background (over the following few trips).  During these trips, you may see a little more or less "red" from Ray than you are used to and your scores might be a slightly off until re-calibration is completed.


If after five trips you are still getting unusual scores then we recommend you reset calibration by doing the following:

  1. Go to the setting menu (press the settings symbol at the bottom right of the home screen). 
  2. Press 'Advanced' followed by 'Calibration' and then press the 'Reset Calibration' button.


You will then follow the same calibration process as when you first set up GOFAR in your car.


If you have any questions, please let contact us at support@gofar.co